Mainly suitable for low voltage electric network to improve power factor, reduce reactive loss and voltage quality
Uses the advanced Zn to Al MPP film
Excellent self-healing performance
High safety: equipped with self-discharging resistant and safety devices inside
Half-solid soad for filled material and no leakage
Rated voltage: 250, 370, 400, 450, 525 and 690V AC
1 to 20KVAR, three or single-phase
Capacitance tolerance: -5 to +5%
Tangent of the loss angle: with the rated frequency and rated voltage, less than or equal to 0.1% at 20
Withstand voltage: between terminals 1.75 times rated voltage for 2 seconds, between terminals and container 3kV AC for 10 seconds
Maximum permissible over-voltage: 110% rated voltage
Maximum permissible over-current: 130% rated current
Self-sustained discharge ability: gives sq.root of 2 un DC voltage to capacitor, the residual voltage reduced to 50V or lower within 3 minutes after power-off
Service conditions:
Ambient temperature: 25 to 50, humidity less than or equal to 85% RH, and altitude lower than 2,000m
